| Author |
Message |
Jonas Riley (Jmr_1727)
Registered Member
Username: Jmr_1727
Post Number: 1
Registered: 8-2006
Posted From: 216.145.85.231
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, August 07, 2006 - 9:56 pm: | |
I have a 1979 MCI-9 with a generac 7.5 kw rv quietpac generator. I recently was on a trip in 90 degree + weather when the generator quit producing. This is how i run my A/C. I have taken it to a repair shop, which told me it was the PC board, but can't seem to find parts for it. The board cannot be repaired because it is sealed. Any suggestions other than buy something besides generac. |
John MC9 (John_mc9)
Registered Member
Username: John_mc9
Post Number: 49
Registered: 7-2006
Posted From: 66.217.108.125
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, August 07, 2006 - 11:22 pm: | |
Re:
"I have taken it to a repair shop, which told me it was the PC board"
I brought the PC board from our propane heater into a major
shop, and they determined it to be bad.. I left w/out the $150 part.
I found a corroded spark-gap was the real cause. The board's
probably still in it to this day...
Isn't that a brush type head on that genset? If so, check the
brushes first..
The PC board is available, a Google for it turns up numerous
outlets: generac 7.5 kw generator circuit board
Most places will overnight one..
A friend's got a Generac.. well... had.. He sold the commercial
portable food operation.. He used it weekly 12-15 hrs per
at least... few years.. no probs.. |
|