| Author | Message | ||
| mark (Coolbus)
Registered Member Username: Coolbus Post Number: 26 Registered: 7-2006 Posted From: 71.1.129.69 Rating: N/A |
Just curious as to the skin on a 4106 bus. Is it all aluminum like the 4104? Or does it have a combination of alum / steel? thanks Mark | ||
| John Feld (Wvobus)
Registered Member Username: Wvobus Post Number: 3 Registered: 2-2005 Posted From: 150.199.209.14 Rating: N/A |
Mark, The front and rear caps are steel. all the rest is aluminum simular to the 4104. | ||
| Gus Causbie (Gusc)
Registered Member Username: Gusc Post Number: 214 Registered: 11-2005 Posted From: 63.97.117.41 Rating: N/A |
I thought the side panel stiffeners on a 4106 were steel also? | ||
| RJ Long (Rjlong)
Registered Member Username: Rjlong Post Number: 1061 Registered: 12-2000 Posted From: 67.181.163.170 Rating: N/A |
Gus - The interior side panel stiffeners on my 4106 are steel. I think there is some in the suspension mounting points, too. FWIW. . .  | ||
| John Feld (Wvobus)
Registered Member Username: Wvobus Post Number: 4 Registered: 2-2005 Posted From: 204.184.224.29 Rating: N/A |
The steel parts are showed in the parts manual on the the 04 % 06, | ||
| Gus Causbie (Gusc)
Registered Member Username: Gusc Post Number: 218 Registered: 11-2005 Posted From: 63.97.117.50 Rating: N/A |
Russ, Thanks, that is what I thought I learned before I started bus shopping. | ||
| mark (Coolbus)
Registered Member Username: Coolbus Post Number: 27 Registered: 7-2006 Posted From: 71.1.129.69 Rating: N/A |
Well, not sure, but does that mean that the exterior skin is all alum except for the front & rear caps? thanks Mark | ||
| RJ Long (Rjlong)
Registered Member Username: Rjlong Post Number: 1066 Registered: 12-2000 Posted From: 67.181.163.170 Rating: N/A |
Mark - Yes. . . | ||
| mark (Coolbus)
Registered Member Username: Coolbus Post Number: 28 Registered: 7-2006 Posted From: 71.1.129.69 Rating: N/A |
thanks, all! Mark |