| Author | Message | ||
| Buddy Tennison (Buddyten)
Registered Member Username: Buddyten Post Number: 78 Registered: 7-2005 Posted From: 207.68.237.63 Rating: N/A |
Guys: We have been given a Model 10 dash for our Eagle. Ours is a model 5. A few questions: 1. How hard is it to change out the dash? 2. If I keep the guages in the Mod 10, how hard is it to wire them up and get them to work? 3. Can I just change over the guages from the Mod 5 to the Mod 10 (which would alleviate any problems with wiring, etc) Give me a litany of possible problems that I will encounter. On a scale of 1 to 10 (10 being hardest) what would you rate this for a DIY? Before I tackle this I would like to have as much info from the experts as I can get. Is there some manual or instruction booklet/article that some of you may have written on the subject. Thanks for all the help. | ||
| Paul Lawry (Dreamscape)
Registered Member Username: Dreamscape Post Number: 455 Registered: 5-2007 Posted From: 12.108.13.70  Rating: N/A |
Buddy, I can't help you with your question as we have an 01. Give Dan at Silver Eagle in Brownsville TX a call, he may be able to help you out. Or post your question on the Eagles International website and join in on the fun. | ||
| Luvrbus (Luvrbus)
Registered Member Username: Luvrbus Post Number: 668 Registered: 8-2006 Posted From: 74.32.92.133 Rating: N/A |
Buddy, you will need all new sending units for the gauges the 05 senders will not work with model 10 gauges.we have a tech section on the Eagles board and will be glad to help in anyway Dan is also on the board www.eaglesinternational.net good luck | ||
| Mark Renner (Boomer)
Registered Member Username: Boomer Post Number: 146 Registered: 11-2006 Posted From: 12.184.78.2  Rating: N/A |
If all else fails on your project, I have a Eagle R&M Fiberglass dash with panel inserts, switches and guages made by Custom Instrument Panels. For sale. Can email pics. | ||
| Mark Renner (Boomer)
Registered Member Username: Boomer Post Number: 148 Registered: 11-2006 Posted From: 206.58.200.38 Rating: N/A |
Dashboard assembly is sold. Thanks | ||
| marvin pack (Gomer)
Registered Member Username: Gomer Post Number: 418 Registered: 3-2007 Posted From: 71.55.179.179  Rating: N/A |
Gollie!! that was quick, I didn't have a chance to bid either. shucks I had a little money left over. Seriously I am looking for one to fit a GMC 4905. I may make one and use the new gauges. I love the R&M dashes they are cool |