| Author | Message | ||
| Pete/RTS Daytona (Pete_rtsdaytona)
Registered Member Username: Pete_rtsdaytona Post Number: 612 Registered: 1-2005 Posted From: 97.104.18.110  Rating: N/A |
see--> http://www.fmcmagazine.com/Images/stories/pdf/ac_safety.pdf | ||
| George M. Todd (George_todd)
Registered Member Username: George_todd Post Number: 1019 Registered: 8-2006 Posted From: 99.29.76.171 Rating: N/A |
That is a GOOD article! G | ||
| Jim Wilke (Jim Bob) (Pd41044039)
Registered Member Username: Pd41044039 Post Number: 474 Registered: 2-2001 Posted From: 184.0.3.170 Rating: N/A |
Thanks, Pete, If I'm not mistaken, that is parts 1 & 2 but not 3. Is part 3 yet to come? | ||
| Jack Fids (Jack_fids)
Registered Member Username: Jack_fids Post Number: 72 Registered: 1-2009 Posted From: 69.171.160.137  Rating: N/A |
My Part -3 came thru with no problem....I'll sell you a copy of mine.... | ||
| Len Silva (Lsilva)
Registered Member Username: Lsilva Post Number: 361 Registered: 12-2000 Posted From: 72.187.35.208  Rating: N/A |
It is a well written and informative article. I have a minor criticism of the second figure on page 43, showing the 50 amp shore line connection to the breaker panel. The connection to the panel should be through a single handle two pole breaker and not the two separate breakers as shown. It was probably shown that way to simplify the drawing but there was no explanatory text confirming that. It could be confusing to someone with limited knowledge of electrical wiring. | ||
| Jim Wilke (Jim Bob) (Pd41044039)
Registered Member Username: Pd41044039 Post Number: 478 Registered: 2-2001 Posted From: 184.0.3.170 Rating: N/A |
Sorry, I do have part three. Thanks anyway, Jack. |