| Author | Message | ||
| Van (Van)
Registered Member Username: Van Post Number: 118 Registered: 7-2008 Posted From: 68.108.81.25  Rating: N/A |
Need some help here folks Embarrassed. We just discovered that we had a Coleman 23,000 btu furnace stashed under all the stuff we pulled from our bus, it is a model 8623-779 with serial #1685393. Seems to be in good condition and all intact, cept for missing the outside vent grill as well as the inside grill. We sure would like to know if this thing works or not and am needing the owners manual or maybe a wiring diagram. Tried searching the net with little to no success any help would be greatly appreciated. | ||
| marvin pack (Gomer)
Registered Member Username: Gomer Post Number: 1036 Registered: 3-2007 Posted From: 71.55.1.12  Rating: N/A |
Van Bring it by the house and I will Bench test it for you at no charge. Go to Coleman company and if they don't have any info let me know and I will try to find in my archives some info.. It was mfg in 1993 and grills are available for the outside. Some of the units when installed, hooked up to duct work inside. If the front is one piece and they have places for cut outs then it hooks to ducting. let me know. Gomer | ||
| Van (Van)
Registered Member Username: Van Post Number: 119 Registered: 7-2008 Posted From: 68.108.81.25 Rating: N/A |
Gomer thanks, still no info on the web. I would be glad to bring it by, but won't be your way for another year or so lol. It does have holes on each side where the flex ducting attached other than that not much else to go by. | ||
| marvin pack (Gomer)
Registered Member Username: Gomer Post Number: 1039 Registered: 3-2007 Posted From: 71.55.1.12 Rating: N/A |
OKEY DOKEY Van, let me call around and see if I can locate a vent for the exhaust/intake air. Gomer |