| Author | Message | ||
| Bill Holstein (Billmoocow)
Registered Member Username: Billmoocow Post Number: 155 Registered: 5-2009 Posted From: 71.59.162.64  Rating: N/A |
I have no intrest in this bus but might be good deal for some of our want to be nuts.http://corvallis.craigslist.org/rvs/2555043101.html | ||
| Luvrbus (Luvrbus)
Registered Member Username: Luvrbus Post Number: 1252 Registered: 8-2006 Posted From: 184.10.191.147 Rating: N/A |
Transmission is bad in that bus it will need to on a trailer to go any place. I wanted it but was a 3000 tow bill to get it here good luck | ||
| Bill Holstein (Billmoocow)
Registered Member Username: Billmoocow Post Number: 156 Registered: 5-2009 Posted From: 71.59.162.64 Rating: N/A |
Maybe it needs some fluid? I can not comprehend ''needs new transmission'' | ||
| Luvrbus (Luvrbus)
Registered Member Username: Luvrbus Post Number: 1254 Registered: 8-2006 Posted From: 184.10.191.147 Rating: N/A |
5 speed manual Bill he told me the case was busted I like those buses I have a FLX friend checking on a 4 or 5 speed for me. I really haven't figured out who the owner is yet good luck | ||
| Tim Brandt (Timb)
Registered Member Username: Timb Post Number: 629 Registered: 10-2003 Posted From: 66.165.176.62  Rating: N/A |
That looks to be the DINA model of the flxliner or maybe just a flx with the updated DINA caps. On the trans mine has a 6000 series spicer 5 speed if that helps your search | ||
| Luvrbus (Luvrbus)
Registered Member Username: Luvrbus Post Number: 1255 Registered: 8-2006 Posted From: 184.10.191.147 Rating: N/A |
It is a Dina but has the 6000 series transmission like a Flx and I was told the hookup was the same as Flx by the Flx crowd sharp old bus huh good luck (Message edited by luvrbus on August 24, 2011) | ||
| Luvrbus (Luvrbus)
Registered Member Username: Luvrbus Post Number: 1256 Registered: 8-2006 Posted From: 184.10.191.147 Rating: N/A |
(Message edited by luvrbus on August 24, 2011) | ||
| joe padberg (Joemc7ab)
Registered Member Username: Joemc7ab Post Number: 545 Registered: 6-2004 Posted From: 66.38.159.33 Rating: N/A |
Clifford I have gone through a similar situation with the MC1,but now am in the finishing stage of it. Give me a call evenings, and I will tell you the whole litany as to how I went at it. Joe. | ||
| joe padberg (Joemc7ab)
Registered Member Username: Joemc7ab Post Number: 546 Registered: 6-2004 Posted From: 66.38.159.33 Rating: N/A |
If all it needs is a case, (most likely aluminum) there is one not very far from here. |