| Author |
Message |
C. Ray Powell (Raypowell)
Registered Member
Username: Raypowell
Post Number: 99
Registered: 3-2001
Posted From: 75.206.54.31
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, March 28, 2007 - 8:01 pm: | |
Anone know how the numbering sequence for the studs in electric junction box in engine compartment go? does the numbering start at top or bottom, left side or right side? There's about 50 studs. My numbers are gone. Just installed differant engine, now there's not any electric power to the remote stop switch.
Thanks, C Ray |
James Robinson (Jjrbus)
Registered Member
Username: Jjrbus
Post Number: 50
Registered: 12-2000
Posted From: 76.1.180.218
Rating: N/A
Votes: 0 (Vote!) | | Posted on Thursday, March 29, 2007 - 5:26 pm: | |
Tried to send some photos to your escapee address! |
George M. Todd (George_mc6)
Registered Member
Username: George_mc6
Post Number: 117
Registered: 8-2006
Posted From: 207.231.80.150
Rating: N/A
Votes: 0 (Vote!) | | Posted on Thursday, March 29, 2007 - 7:25 pm: | |
Say Ray,
If they numbered your 5C the same as my 6, and your box is "upside down" in the left rear of the engine compartment, #1 is the left rear terminal, and the numbers increase going towards the right, or center of the bus, in that row. The next row in towards the front of the bus has the next higher numbers, from left to right, and so on. Mine has four rows of twelve, for what that's worth.
HTH,
George |
|