Author |
Message |
Bill Gerrie (Bill_gerrie)
Registered Member Username: Bill_gerrie
Post Number: 93 Registered: 3-2006 Posted From: 209.50.74.6
Rating: N/A Votes: 0 (Vote!) | Posted on Tuesday, May 29, 2007 - 11:45 pm: | |
I finally had a chance to test the O/D unit on my V731 that Bill Teal designed. I did a 900 mile trip with it and it works great. Coast to engage and accelerate to disengage and you don't even feel it work. The tachometer is the only indication of it. Although I have used it only on a 900 mile trip I showed about a 2 mile per gallon increase. Going on a 10,000 mile in the fall so I hope to show pretty good fuel savings especially at the cost of the stuff now. Bill |
Jerry Liebler (Jerry_liebler)
Registered Member Username: Jerry_liebler
Post Number: 246 Registered: 3-2005 Posted From: 71.31.3.204
Rating: N/A Votes: 0 (Vote!) | Posted on Wednesday, May 30, 2007 - 12:03 am: | |
Bill, Congratulations!! And you now have the only one mated to a 6V92. I gave up on my project of building one(I like the Spicer) and sold the plans and the stuff I'd acumulated to someone who may actually finish it. Regards Jerry 4107 1120 |
Paso One (Paso_1)
Registered Member Username: Paso_1
Post Number: 91 Registered: 11-2004 Posted From: 142.165.246.239
Rating: N/A Votes: 0 (Vote!) | Posted on Wednesday, May 30, 2007 - 9:13 am: | |
That is great Bill I'm glad it works so good. Is your 10,000 mile trip out west??? |
Austin Scott Davis (Zimtok)
Registered Member Username: Zimtok
Post Number: 128 Registered: 9-2006 Posted From: 216.37.73.226
Rating: N/A Votes: 0 (Vote!) | Posted on Wednesday, May 30, 2007 - 10:29 am: | |
Hey Bill, Can you give us some more info? Like what was your top speed before and after the OD install. How long did it take to install? What was the cost? And any photos would be great. . |
Bob Baldwin (Bob4106)
Registered Member Username: Bob4106
Post Number: 122 Registered: 10-2004 Posted From: 24.74.191.119
Rating: N/A Votes: 0 (Vote!) | Posted on Wednesday, May 30, 2007 - 4:24 pm: | |
I hear Bill Teal had a book out about this. Is it still available? Would be interested in all the info too. If you could post or email all the great info. What Austin ask for would be great. Got my interest too. |
Dan West (Utahclaimjumper)
Registered Member Username: Utahclaimjumper
Post Number: 43 Registered: 1-2005 Posted From: 208.66.39.51
Rating: N/A Votes: 0 (Vote!) | Posted on Wednesday, May 30, 2007 - 8:02 pm: | |
The last time I talked with Bill he had dropped his price for the book from $250.00 to &175.00 and still had a few left.>>>Dan |
Dan West (Utahclaimjumper)
Registered Member Username: Utahclaimjumper
Post Number: 44 Registered: 1-2005 Posted From: 208.66.39.51
Rating: N/A Votes: 0 (Vote!) | Posted on Wednesday, May 30, 2007 - 8:26 pm: | |
Bills E-thing is (lower case) w_teal@msn.com >>>Dan |
Dan West (Utahclaimjumper)
Registered Member Username: Utahclaimjumper
Post Number: 45 Registered: 1-2005 Posted From: 208.66.39.51
Rating: N/A Votes: 0 (Vote!) | Posted on Wednesday, May 30, 2007 - 8:29 pm: | |
I dont know why it ended up with an underline, it should be w underline teal >>>Dan |
Bill Gerrie (Bill_gerrie)
Registered Member Username: Bill_gerrie
Post Number: 94 Registered: 3-2006 Posted From: 209.50.74.6
Rating: N/A Votes: 0 (Vote!) | Posted on Wednesday, May 30, 2007 - 8:37 pm: | |
My top speed with the regular V731 is 68 mph at 2110 rpm. Now with the O/D unit it is 88 mph on paper. I have not run it at that speed but the math shows it should be 88 mph at 2110 rpm. I am running 4.56 to 1 gears in the rear end. At 65 mph without the O/D unit I turn 2036 rpm and with the O/D engaged I turn 1566 rpm. I still have to overcome a 30* rise in temp with the O/D unit working but another cooler should do that. I am really pleased with the results but the availability of the gear sets is very limited. Bill Teal got some from Mexico if I remember right. Nimco might have some VS2 trannys around. You need the 8V71 flywheel from a VS2-8, (can be reworked for 92 series) V730 input shaft, VS2 input shaft, VS2-8 planetary gear set and a VS2-6 planetary gear set, and an direct/overdrive clutch pack from either VS2 tranny. I took a long time to accumulate the parts but then it went okay. I have some pictures but I don't know how to post them. I am away for a few days but somebody might tell me how to post them so I can do it next week. Bill |
Bill Gerrie (Bill_gerrie)
Registered Member Username: Bill_gerrie
Post Number: 95 Registered: 3-2006 Posted From: 209.50.74.6
Rating: N/A Votes: 0 (Vote!) | Posted on Wednesday, May 30, 2007 - 9:06 pm: | |
Paso One I forgot to answer your question. We are going with 40 motorhomes from Salt Lake City Utah out west to CA, Grand Canyon, Vegas, etc and ending up in Albuquerque NM for the Balloon festival. Really looking forward to it. Bill |
Dan West (Utahclaimjumper)
Registered Member Username: Utahclaimjumper
Post Number: 46 Registered: 1-2005 Posted From: 208.66.39.51
Rating: N/A Votes: 0 (Vote!) | Posted on Wednesday, May 30, 2007 - 9:25 pm: | |
Bill, when are you planing to go? I live in Cedar City and know the area well, have been wanting to do the balloon festival for a long time.>>>Dan |
Buswarrior (Buswarrior)
Registered Member Username: Buswarrior
Post Number: 1017 Registered: 12-2000 Posted From: 74.12.90.128
Rating: N/A Votes: 0 (Vote!) | Posted on Thursday, May 31, 2007 - 7:31 pm: | |
Way to go, Bill! happy coaching! buswarrior |
Bill Gerrie (Bill_gerrie)
Registered Member Username: Bill_gerrie
Post Number: 98 Registered: 3-2006 Posted From: 209.50.74.6
Rating: N/A Votes: 0 (Vote!) | Posted on Sunday, June 03, 2007 - 11:16 pm: | |
Dan It is a planned tour with about 40 other units ranging from trailers to motorhomes. I don't have the itinerary till July so no idea yet as to the dates. All I know is we meet in Salt Lake City on Sept 4th ending up at the Balloon Festival for a week in October then head home. Buswarrior Hope to see you at the Grand Bend rally this year. August 23 to 26th. We leave to the USA after that. Bill |
Buswarrior (Buswarrior)
Registered Member Username: Buswarrior
Post Number: 1018 Registered: 12-2000 Posted From: 74.12.88.130
Rating: N/A Votes: 0 (Vote!) | Posted on Thursday, June 07, 2007 - 4:59 pm: | |
10-4. Need some air tanks replaced..... need some time...... happy coaching! buswarrior |