| Author |
Message |
Laryn Christley (Barn_owl)
Registered Member
Username: Barn_owl
Post Number: 41
Registered: 10-2006
Posted From: 153.2.246.32
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, June 20, 2007 - 2:12 pm: | |
Would anyone have a number that I can reference locally for a front wheel seal on a 4106? This turned out to be a last minute thing before my trip, so I was hoping to get a seal before pulling the hub.
Thanks in advance,
Laryn
(Message edited by barn_owl on June 20, 2007) |
Erik J Rohlik (Pigsfly_jr)
Registered Member
Username: Pigsfly_jr
Post Number: 8
Registered: 11-2006
Posted From: 69.137.184.138
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, June 20, 2007 - 3:29 pm: | |
Here is a C/R # 40086. Around $27 each.
Erik |
Laryn Christley (Barn_owl)
Registered Member
Username: Barn_owl
Post Number: 42
Registered: 10-2006
Posted From: 72.66.187.9
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, June 20, 2007 - 11:35 pm: | |
Erik,
Thanks for taking the time to get me that number; I will leave early tomorrow to get it.
Laryn |
Erik J Rohlik (Pigsfly_jr)
Registered Member
Username: Pigsfly_jr
Post Number: 9
Registered: 11-2006
Posted From: 69.137.184.138
Rating: N/A
Votes: 0 (Vote!) | | Posted on Thursday, June 21, 2007 - 11:45 am: | |
Laryn
You are welcome. I had new tires put on our 4106 and one of the studs got striped so I replaced all of them and the seal. I keep a log of part numbers that I use easer to get parts when you want them. Have a safe and fun trip
Erik |
Laryn Christley (Barn_owl)
Registered Member
Username: Barn_owl
Post Number: 46
Registered: 10-2006
Posted From: 151.199.10.100
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, June 24, 2007 - 11:27 pm: | |
Erik,
Thanks again for the seal number. I called skf and crossed referenced it to their Scotseal plus XL. This worked out well because some slacky mechanic buggered up the seat the last time a race was installed, so I needed the outside sealing ability that the XL offered. One added bonus; it requires no tools, only need to push it into place with your fingers. This is the first time I have used one, so only time will tell. From everything I read this seems to be what I needed. It pays to shop around, the 40086 was quoted from $37 (Industrial Supply), $65 (Allied Industries), $27 (NAPA). The 40091 seal at NAPA was $32.
Here is the link to the Scotseal plus XL:
http://www.skf.com/portal/skf_za/home/skfsa?contentId=153158&lang=en
Laryn |