Tilt column to gear box connection Log Out | Topics | Search
Moderators | Edit Profile

BNO BBS - BNO's Bulletin Board System » THE ARCHIVES » Year 2002 » April 2002 » Tilt column to gear box connection « Previous Next »

Author Message
Lee Brady (Leeb11) (199.44.43.208)

Rating: N/A
Votes: 0 (Vote!)

Posted on Saturday, April 06, 2002 - 10:05 pm:   

Hi all
Im wanting to install a Autotech tilt steering column in my 01 Eagle.
The column has a 1" splined shaft and the Eagle gear box has a 7/8" splined shaft.
Has anyone run into this problem and have they found a adapter to connect the two?
If so where would you get one?
Thanks Lee
Mrbus (64.12.102.32)

Rating: N/A
Votes: 0 (Vote!)

Posted on Sunday, April 07, 2002 - 7:47 pm:   

Hello Lee,

Go to your nearest Mack Truck dealer, tell the parts man that you want part # 2104*104601* the description in the parts book is 219B yoke lists for $25.68, you can usually buy them for about $17.00. The next part is 2104*104961* 28033 Yoke, lists for $23.05. Next one is part # 2104*5103X*, 219C Journal, lists for $ 23.22. The yokes are the one inch and the 7/8, the journal is the cross to connect them together.
makes a perfect connection.
Good luck, Gus Haag Minnesota
Ken Munford (165.247.66.83)

Rating: N/A
Votes: 0 (Vote!)

Posted on Sunday, April 07, 2002 - 7:49 pm:   

IBP has them .Ask for Steve but count the no. of teeth on the spline on both pieces first. 1 (800)468-5287

Add Your Message Here
Posting is currently disabled in this topic. Contact your discussion moderator for more information.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration