| Author | Message | ||
| Pete/RTS Daytona (Pete_rtsdaytona)
Registered Member Username: Pete_rtsdaytona Post Number: 468 Registered: 1-2005 Posted From: 72.189.26.118  Rating: N/A |
Hi All I'm looking for an OLD DDEC-II (especially) and DDEC-4 (next phase)- HARNESSES and any sensors if you have them - to build a test harness to plug into DDEC's and test and see/record/ things like: 1-H.P rating 2-record historical error codes 3-Smoke Control status and even change ?? things that are settable by my PROLINK9000 like: 1-reset historical error codes 2-Cruse Control (max speed/high-low limits/PPM or RPMs/mph) 3-Idle Shutdown (on/off) (shutdown conditions) (time) Override ?? 4-Password Hopefully when I'm done - I can change some of the simple stuff for others members - or even RENT out my tester and instructions for a small fee and a deposit. Thanks Pete RTS/Daytona | ||
| Jack Campbell (Blue_goose)
Registered Member Username: Blue_goose Post Number: 80 Registered: 5-2007 Posted From: 71.100.207.86  Rating: N/A |
Pete, I have some harnesses wires that I got for you. I will ship, but they came out of a DD692 so you get the oil with them. They are in a plastic bag so be carefull when you take them out. If your address isn't in your profile send it to me. Jack | ||
| Jack Campbell (Blue_goose)
Registered Member Username: Blue_goose Post Number: 81 Registered: 5-2007 Posted From: 71.100.207.86 Rating: N/A |
They went in the us mail today. Don't forget they are dirty and have lots of oil on them. You can get dirty just opening the box. They are in a plastic bag inside the box. Jack |