| Author | Message | ||
| Joe Franklin (Franklinga)
Registered Member Username: Franklinga Post Number: 5 Registered: 1-2005 Posted From: 192.206.119.3 Rating: N/A |
I need a running 8V71 for my MC9. Anybody know where I can get one? I'm located in Georgia. | ||
| Jack Campbell (Blue_goose)
Registered Member Username: Blue_goose Post Number: 99 Registered: 5-2007 Posted From: 71.100.201.35  Rating: N/A |
Joe, give me a call. I know where there is a 8v71 that just came out of a seven that is a good take out. 863-206-3838 Jack | ||
| Ben B. Wolff (Ben_mc7)
Registered Member Username: Ben_mc7 Post Number: 23 Registered: 4-2007 Posted From: 24.73.7.114 Rating: N/A |
Joes, I am taking out my 8V71 this month from my MC7. It has less than 10k on an in-frame rebuild. I am in Plant City (near Tampa). My cell is 941-725-0636. Ben | ||
| Darren Upfield (Mwerx)
Registered Member Username: Mwerx Post Number: 62 Registered: 6-2006 Posted From: 66.82.9.57 Rating: N/A |
Joe we have a motor less than 5000ml on in frame,with jakes, thanks Darren. | ||
| Norm Edlebeck (Bandleader)
Registered Member Username: Bandleader Post Number: 59 Registered: 2-2004 Posted From: 76.17.179.197 Rating: N/A |
Joe - Have 8V71 inframed 23,600 mi ago - in a GMC 4905. Also, rebuilt trans (manual) & rear-end at the same time. ALSO, new clutch 890 mi. ago. In N.E. WI. Make Offer!!!! call (507)441-0139 or (507)354-1499 | ||
| Jack Conrad (Jackconrad)
Registered Member Username: Jackconrad Post Number: 797 Registered: 12-2000 Posted From: 76.3.173.51  Rating: N/A |
Joe, What brand bus? Left or right hand drive? I think i know where there is a right hand drive (out of an MC-7) in Fla. The owner just removed it from an MC and replaced it with a Cummins L-10. Jack | ||
| George M. Todd (George_mc6)
Registered Member Username: George_mc6 Post Number: 513 Registered: 8-2006 Posted From: 207.231.75.253 Rating: N/A |
He does say an MC9 in the post.... Guess that means the one out of the 4905 wont work? Sorry, G | ||
| RJ Long (Rjlong)
Registered Member Username: Rjlong Post Number: 1407 Registered: 12-2000 Posted From: 67.181.166.160  Rating: |
George - If Joe was to install Norm's 4905 engine in his MC-9, he'd end up with four speeds in reverse and one go forward. . . MC-9s need a RH engine. GMC V-drives use LH engines. FWIW & HTH. . .  |
