| Author | Message | ||
| Jim Wallin (Powderseeker01)
Registered Member Username: Powderseeker01 Post Number: 34 Registered: 10-2008 Posted From: 173.14.23.49  Rating: N/A |
I have all new rubber for my 4107 except for the destination sign. Does anyone have a source that might still have one of these elusive seals? Thanks alot! | ||
| Bob Baldwin (Bob4106)
Registered Member Username: Bob4106 Post Number: 173 Registered: 10-2004 Posted From: 24.74.180.20  Rating: N/A |
I got mine from Luke's a few years back. Try him (888) 262-2434 | ||
| clint hunter (Truthhunter)
Registered Member Username: Truthhunter Post Number: 380 Registered: 1-2009 Posted From: 24.129.232.219  Rating: N/A |
!!!or prepare the old one properly , degrease with simple green when your done, let dry (after a good blow job in the cracks were the water pools) and fake it with good black silicon, the best you can buy will last longer in the sun than the cheap mixtures, just use lots of spit on your molding knife to reshape it (before it skins) to look like new. -lots of paper towels, a good safe working platform , and don't panic over the mess , you can scrape it off with a razor 48 hours after the new seal repair is set (do not disturb till then) . >of course this assumes you haven removed the old one to deal with rust or corrosion issues under the seal lips. .practical bus repairing to "allbusnutkind" | ||
| john w. roan (Chessie4905)
Registered Member Username: Chessie4905 Post Number: 1599 Registered: 10-2003 Posted From: 71.58.110.9  Rating: N/A |
Try Mohawk Bus parts. They may want the original part number. |