| Author | Message | ||
| Darrell Black, DVM (Darrelldvm)
Registered Member Username: Darrelldvm Post Number: 46 Registered: 6-2005 Posted From: 209.78.171.84 Rating: N/A |
I want to put a new tail pipe on the 4106. I can't get the tail pipe off my muffler W/O great effort so I can't measure the mufffler out-let diameter. I'm assuming it's 3.5 inch. I want to direct the exhaust to the side, I'll need 90 degree angle & then a tip. I haven't located a source of 3.5 inch pipe yet either. So, what size is the out-let and where do I find needed supplies? | ||
| Rob Norgren (Robsedona)
Registered Member Username: Robsedona Post Number: 80 Registered: 11-2007 Posted From: 75.209.141.166  Rating: N/A |
Try Here http://www.unitedmuffler.com/images/large/busexhaustacc0003.gif This is their page on elbows They have all sizes Phone# on the bottom Their Home page is http://www.unitedmuffler.com/ Hope This Helps Don't know them Just did a Search for Heavy Truck Bus Exhaust they are the ones that had all sizes of pipe Rob Here is another Has 3 - 7 inch pipe Short 90s Grand Rock Co., Inc. 395 Fountain Ave Painesville, OH 44077 Phone: 440-639-2000 Toll Free: 800-321-3674 (USA and Canada) Fax: 440-639-2010 (Message edited by Robsedona on September 12, 2009) | ||
| john w. roan (Chessie4905)
Registered Member Username: Chessie4905 Post Number: 1628 Registered: 10-2003 Posted From: 71.58.110.9  Rating: N/A |
Just go to a NAPA store. They have these items, including mufflers, in their exhaust catalog under the heavy duty section. | ||
| Darrell Black, DVM (Darrelldvm)
Registered Member Username: Darrelldvm Post Number: 47 Registered: 6-2005 Posted From: 209.78.171.84 Rating: N/A |
Thanks, I need to know what the muffler out-let diameter is, then I can get the elbow from United. Darrell | ||
| Rob Norgren (Robsedona)
Registered Member Username: Robsedona Post Number: 82 Registered: 11-2007 Posted From: 70.210.143.84 Rating: N/A |
I think If you measure the out side at the Muffler then take away the thickness of the pipe x2 you should have the pipe inside or ID at the end and the same size for the muffler OD outlet. Look at the pipe you have now is the muffler end flared or strait Tell the sales person what you have now as far as tail pipe and tell them the change you are making the sales person should be able to get you what you need! Hope this helps you! Rob (Message edited by Robsedona on September 13, 2009) | ||
| FloridaCliff (Floridacracker)
Registered Member Username: Floridacracker Post Number: 419 Registered: 7-2004 Posted From: 97.101.146.143 Rating: N/A |
I looked up the parts in this catalog http://www.walkerheavyduty.com/ and used those numbers to order from these guys http://www.rockauto.com/ At the time it was half the price of NAPA and delivered. Cliff | ||
| Larry D Baker (Lbaker4106)
Registered Member Username: Lbaker4106 Post Number: 89 Registered: 5-2005 Posted From: 174.42.152.186 Rating: N/A |
Your muffler outlet should be 3.5 inches. Mine had a 5 inch once but with a new muffler it is 3.5. Got my elbow from Luke. Larry 4106 | ||
| Darrell Black, DVM (Darrelldvm)
Registered Member Username: Darrelldvm Post Number: 48 Registered: 6-2005 Posted From: 209.78.171.84 Rating: N/A |
Larry, Thanks for the info, now I can order my parts. Darrell |
