Author |
Message |
John Wooldridge (Moovin_on)
Registered Member Username: Moovin_on
Post Number: 5 Registered: 6-2008 Posted From: 148.63.184.61
Rating: N/A Votes: 0 (Vote!) | Posted on Tuesday, December 15, 2009 - 8:17 am: | |
Does anyone know of a source for MCI 5/7 windshields and rubbers other than MCI? These are getting hard to find. Also, my parts book does not show the P/N for the rubbers. Could I trouble some one for these P/Ns? Thanks |
marvin pack (Gomer)
Registered Member Username: Gomer
Post Number: 720 Registered: 3-2007 Posted From: 71.53.153.91
Rating: N/A Votes: 0 (Vote!) | Posted on Tuesday, December 15, 2009 - 9:01 am: | |
Luke at U S Coach in Berlin NJ has the glass and gaskets. Curved glass also and IBP in Florida. Gomer |
bill chisholm (Billybandman)
Registered Member Username: Billybandman
Post Number: 154 Registered: 2-2001 Posted From: 198.236.64.25
Rating: N/A Votes: 0 (Vote!) | Posted on Tuesday, December 15, 2009 - 1:38 pm: | |
These guys do a great job up here in the Northwest, very professiona, fair prices, a great to deal with. I just purchased two MC 9 windshiels for $230 for the two of them. $115 each. I think they may have other location in the US Coach Glasswww.coachglass.com 90 North Polk Street Eugene, OR 97402-7109 (541) 684-7868 |
ED Hackenbruch (Shadowman)
Registered Member Username: Shadowman
Post Number: 206 Registered: 11-2003 Posted From: 75.210.117.131
Rating: N/A Votes: 0 (Vote!) | Posted on Tuesday, December 15, 2009 - 5:52 pm: | |
Says they have a location in Az. In. and Fl. besides Or. |
Tom Yaegle (Tom_5c)
Registered Member Username: Tom_5c
Post Number: 35 Registered: 1-2008 Posted From: 96.233.246.165
Rating: N/A Votes: 0 (Vote!) | Posted on Tuesday, December 15, 2009 - 7:55 pm: | |
Do you have a 5 or 7? The 5 has the same windsheild as the 8 not sure about a 7. Tom |
Jack Conrad (Jackconrad)
Registered Member Username: Jackconrad
Post Number: 1179 Registered: 12-2000 Posted From: 74.4.55.77
Rating: N/A Votes: 0 (Vote!) | Posted on Wednesday, December 16, 2009 - 9:14 am: | |
I know the 8 windshield is taller than a 7. I think the early 5 (5a) might be the same as a 7. But I think the later 5 (5c) may be the same as an 8. Definately need to confirm before purchasing. Jack |
Tom Yaegle (Tom_5c)
Registered Member Username: Tom_5c
Post Number: 36 Registered: 1-2008 Posted From: 96.233.246.165
Rating: N/A Votes: 0 (Vote!) | Posted on Thursday, December 17, 2009 - 12:10 pm: | |
I can get the part # for the 5C rubbers, and also measure the height of my glass. Let me know if this will help. Tom |
RJ Long (Rjlong)
Registered Member Username: Rjlong
Post Number: 1659 Registered: 12-2000 Posted From: 67.182.48.162
Rating: N/A Votes: 0 (Vote!) | Posted on Thursday, December 17, 2009 - 12:22 pm: | |
Tom - The windshield glass & rubber gasket for a 5C is identical to the MC-8, since basically that's the front end of your coach. Unfortunately, John has an MC-7 which has a completely different shape & size. He's got to find glass & rubber that fit the 5A or 7. John - Luke's number is 1-888-262-2434. Add it to your address book, as he's a strong supporter of the busnut community. Support those who support us! FWIW & HTH. . .
|
John Wooldridge (Moovin_on)
Registered Member Username: Moovin_on
Post Number: 6 Registered: 6-2008 Posted From: 99.33.254.209
Rating: N/A Votes: 0 (Vote!) | Posted on Tuesday, December 22, 2009 - 12:25 pm: | |
Thanks for the advice and offers of help, folks. RJ is correct--the 7 and 5A use the same windshield. I should have specified 5A in my first post. I have been able to find a windshield and rubber in Eugene OR. Pricey, but at least they are available. I can pick it up there on my summer trip and save shipping, which is a considerable expense for glass. If anyone has the P/N for the driver's side rubber, it would be helpful Thanks again. John |
ED Hackenbruch (Shadowman)
Registered Member Username: Shadowman
Post Number: 213 Registered: 11-2003 Posted From: 75.208.178.83
Rating: N/A Votes: 0 (Vote!) | Posted on Tuesday, December 22, 2009 - 2:51 pm: | |
John, according to my parts book the # is the same for both sides on the 5A. 3C-27-284, also says to specify length. Somebody just got some of these from Luke a couple of months ago if i remember right. Come on over if you want to look at my book. Dusty enough for you today? Had to put all of my projects on hold. |
Tom Dessert (Mci5er)
Registered Member Username: Mci5er
Post Number: 108 Registered: 12-2005 Posted From: 96.39.162.176
Rating: N/A Votes: 0 (Vote!) | Posted on Thursday, December 24, 2009 - 1:11 am: | |
John, I just replaced my 5A windshields a couple months back. They came from MCI, free shipping from Tennesse to Grants Pass Oregon, Luke has the correct rubber very good quality and easy to install. They are one piece with moulded corners, not strips you glue together. Tom |