| Author | Message | ||
| Jason Simons (Bigblock01)
Registered Member Username: Bigblock01 Post Number: 31 Registered: 6-2008 Posted From: 209.164.238.7  Rating: N/A |
I got a guy close to here that has an Onan Emerald III that he said he'd sell me for $500. This seems like really fair price to me right. I'm can look at it and run it before I trade for it he is a reputal mech. here. This is a 6500 watt unit correct that is the specs I have found have not got to where I could get model of serial off unit he said it is an Onan Emerald III out of he's cousins fair size rv. Any advice apprectated. Also mounting options for mc9 was thinking about a/c bay as it does not work anymore??? | ||
| joe padberg (Joemc7ab)
Registered Member Username: Joemc7ab Post Number: 433 Registered: 6-2004 Posted From: 66.38.159.33 Rating: N/A |
Jason Emerald is designated NHE Engine type N60V 14bhp Comp ratio 7:1 Displacement 60 cu in Voltage 120@54.2Amps Uses auto type starter. built from mid eighties onward Joe. | ||
| Jaime Martinez (Jaime)
Registered Member Username: Jaime Post Number: 14 Registered: 4-2009 Posted From: 68.3.131.219  Rating: N/A |
Not a bad genset I have one and like it. My NHE is a propane genset. It is air cooled and works well in the high temps of AZ. I have it mounted in the ac bay of aMCI 5a with factory tray on slides so I can slide it out to do general maintance. it is not a very loud genset but definitly not as a quite as a honda. I will get some picture and post them. (Message edited by jaime on July 06, 2010) | ||
| Jason Simons (Bigblock01)
Registered Member Username: Bigblock01 Post Number: 32 Registered: 6-2008 Posted From: 98.92.3.221 Rating: N/A |
Thanks for the response I'm going to get the gen and would love to see the pics where did you get the slide or did you make it yourself. | ||
| Jaime Martinez (Jaime)
Registered Member Username: Jaime Post Number: 15 Registered: 4-2009 Posted From: 68.3.131.219 Rating: N/A |
I will see if I can get some pics tomarrow and post them. it was installed by the PO but he did do a nice job. | ||
| Jaime Martinez (Jaime)
Registered Member Username: Jaime Post Number: 16 Registered: 4-2009 Posted From: 68.3.131.219 Rating: |
Well I have the pics so here goes          (Message edited by jaime on July 11, 2010) | ||
| Jaime Martinez (Jaime)
Registered Member Username: Jaime Post Number: 17 Registered: 4-2009 Posted From: 68.3.131.219 Rating: N/A |
Oh forgot ventalation from underneath not sure if this was already there as part of the AC unit  (Message edited by jaime on July 11, 2010) | ||
| Jason Simons (Bigblock01)
Registered Member Username: Bigblock01 Post Number: 35 Registered: 6-2008 Posted From: 209.164.238.7 Rating: N/A |
Thanks for the pics that helps alot. I like the slide for service. |
