| Author | Message | ||
| Russell Beam (Rcbeam)
Registered Member Username: Rcbeam Post Number: 29 Registered: 11-2009 Posted From: 74.131.50.239  Rating: N/A |
The left wiper on my MC8 slammed the windshield molding every time it swung left. The PO never fixed it and it had started to beat up the molding. I called Luke and ordered a rebuild kit. Rebuilt it today and reinstalled it... more work getting it in and out than the actual rebuild. Lots of rusty screws. But it works and once the arm was properly positioned, it no longer slams the left edge. I now have wipers. The instructions in the book could be a bit more specific but it was doable. Maybe we were just lucky. Gota luv a success story. | ||
| Dave Walker (Chrome_dome)
Registered Member Username: Chrome_dome Post Number: 117 Registered: 3-2010 Posted From: 67.174.144.159  Rating: N/A |
Russel what did the rebuild kt cost you Dave | ||
| FAST FRED (Fast_fred)
Registered Member Username: Fast_fred Post Number: 1338 Registered: 10-2006 Posted From: 99.12.242.128  Rating: N/A |
Sometimes a spray in the inlet to the units with your favorite lubricant will help balky units. FF | ||
| Ralph Peters (Ralph7)
Registered Member Username: Ralph7 Post Number: 156 Registered: 3-2004 Posted From: 75.206.39.217 Rating: N/A |
I installed new bushings, and yes screws/bolts were the biggest problem, did both sides, only lubed the motors. Did not need motor parts. To me is was easy. | ||
| Russell Beam (Rcbeam)
Registered Member Username: Rcbeam Post Number: 31 Registered: 11-2009 Posted From: 72.250.169.58 Rating: N/A |
Dave: the kit for one air motor from Luke @ US Coach was $69 plus ups. |