| Author | Message | ||
| Maxey7777 (205.188.192.57)
Rating: |
I have been a member for about 1 and 1/2 mo. I see the same thing that has been on this site for weeks. I have a 4104 that I am converting I sure would like to here from someone doing the same. It seems as if everone has lost interest. I could use some ideas on what to do on the walls, cieling ect. ect. Thanks Frank | ||
| Fred Robbins (Stardust) (63.15.218.163)
Rating: N/A |
HI Always willing to talk 04 Have a 1960 /04 Stardust stardustcoach@msn.com | ||
| Gene Lewis (Genelewis) (166.82.1.83)
Rating: N/A |
I'm using a short nap carpet on my walls. Ceiling will be foam rubber & naughide glued to 4x8 panels. These are my choices - hope the help. Enjoying the journey in NC, Gene Lewis | ||
| sam phillips (165.166.44.14) Rating: N/A |
i'm redoing the interior on a 58 4104. walls will be plywood with oak flooring glued on. Part is done. do not know yet what type of headliner. oh the fun of it in se ga. | ||
| gil (209.142.9.82) Rating: N/A |
Frank You can check out this site. http://www.ronthebusnut.com/ProductDetails.asp?ProductID=1550001 Found this product sounds like just what you may be looking for. gil | ||
| Tuck-04 (165.166.44.14) Rating: N/A |
Go to my site and you can see what I did to my 4104 http://members.home.net/rick.b/melvint.htm Tuck and roll ceiling. walls are covered with vinyl over 1 inch foam... Jus s ome ideas Tuck-04 | ||
| Molly Mahnke (24.179.181.227)
Rating: N/A |
Hi everyone! I am looking for an older GMC fishbowl. 35' is okay, 40' is better. It HAS to be in very good mechanical condition. No rust or body damage (I just got sc---ed on eBay by a guy in CAL.) I don't have much $$$. If you know where I can find a decent fishbowl in good condition email me, please! I'm in the midwest so getting to the coasts is a little tough. Thank you. Molly | ||
| guy bouchard (Outahere) (161.184.179.164)
Rating: N/A |
Hi This is my first message on this board. Used to be on the old board but it left and I just now found it. We're converting a 4905A and are now at the point of repairing the rusted metal around the windows in the steel area. Wondering if anybody's been there done that and how serious a task this can become. | ||
| sam ervin (216.12.56.113)
Rating: N/A |
hello we just bought a 58-4104-3434 starting t o convert now hope to enjoy her soon seems to run good smokes a little more than i would like the old owner had a fuel pump put on but never had the rack run was told that this should of been done is this true thanks sam |
