DDEC and V730 Log Out | Topics | Search
Moderators | Edit Profile

BNO BBS - BNO's Bulletin Board System » THE ARCHIVES » Year 2004 » March 2004 » DDEC and V730 « Previous Next »

Author Message
Juan Navarro (Jnavarro) (64.166.111.182)

Rating: N/A
Votes: 0 (Vote!)

Posted on Sunday, March 14, 2004 - 9:54 am:   

Hi all,

Does any one know if an electronic controlled motor, DDEC can be used with a non electronic transmision?
Can the ECM outputs to the trannie be left unconnected and the computer told not to use them?
Is the ECM expecting a signal from the trannie?
Any input will be greatly appreciated,

Juan PD4104
Jimmci9 (209.240.205.68)

Rating: N/A
Votes: 0 (Vote!)

Posted on Sunday, March 14, 2004 - 9:59 am:   

yes... but the trans will need the modulator changed from mechanical to electronic....
Juan Navarro (Jnavarro) (205.216.149.102)

Rating: N/A
Votes: 0 (Vote!)

Posted on Thursday, March 18, 2004 - 1:28 pm:   

Thanks Jim for the reply, sorry it took so long, I need to do more research on the electronic modulator, before I consider the DDEC.

Thanks again

Juan
Jimmci9 (209.240.205.68)

Rating: N/A
Votes: 0 (Vote!)

Posted on Thursday, March 18, 2004 - 3:22 pm:   

email me off the board at jimcat2@webtv.net and i'll put you in contact with a DD/allison dealer that will help you.... they bail me out all the time...

Add Your Message Here
Posting is currently disabled in this topic. Contact your discussion moderator for more information.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration