| Author |
Message |
Ted Schuler (Red4501)
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, March 06, 2005 - 3:33 pm: | |
Well, I'm back at it again. The compressor head is getting hot but still the bus is not airing up. Is the govner attached to the compressor or is it possibly located some where else? |
TWODOGS (Twodogs)
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, March 06, 2005 - 3:46 pm: | |
bolted to side of compressor...looks kinda like a pack of cigarettes with a rocket ship comeing out of it..two bolts (7/16) head I think |
Brian (Bigbusguy)
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, March 06, 2005 - 10:08 pm: | |
If the compressor is water cooled it will get warm (hot) just from the coolent.
Did you see if it was sucking in air?? If its going in its coming out some place ether in the tanks or out a leak. And if you dont know what the governer is or looks like you realy should not be messing with it any way. 2am in the middle of no place with no air would realy suck.
Brian 4905 Klamath Falls Oregon
(Master compressor tech for 15 years) |
TWODOGS (Twodogs)
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, March 06, 2005 - 10:51 pm: | |
we all need to learn....the d2 air governer needs to be disasembled & cleaned every three years...or...replaced...25.00 anywhere for a new one...air is VERY important... |
TWODOGS (Twodogs)
Rating: N/A
Votes: 0 (Vote!) | | Posted on Tuesday, March 08, 2005 - 12:26 pm: | |
GOT to know ...did you locate & replace D2 |
Ted Schuler (Red4501)
Rating: N/A
Votes: 0 (Vote!) | | Posted on Tuesday, March 08, 2005 - 7:49 pm: | |
found it, bought it, will installing it this weekend or sooner if I get the other honey do's out of the way. I will keep you informed. Thanks for all the input. |
TWODOGS (Twodogs)
Rating: N/A
Votes: 0 (Vote!) | | Posted on Tuesday, March 08, 2005 - 8:00 pm: | |
look at your old d2 after you take it off...& plug up the SAME holes in the new one....this is important |